We design and install office partitions for companies: glass partitions for offices and meeting rooms, timber and mixed partitions, and workstation screens for privacy and noise control, manufactured in Jeddah and installed across Saudi Arabia.
Office partitions
When a team grows or departments change, companies need manager offices, small meeting rooms and quiet zones, but fixed walls are costly, slow and hard to change. Office partitions are a flexible solution that divides space quickly, keeps natural light flowing and can be rearranged later.
At Elite Premier we design partitions as part of the whole office plan and match their finishes with your workstations and storage units. We coordinate with your finishing contractor when power, lighting or ceiling work is needed.
To tackle noise in open-plan areas, read open office acoustics, and to plan layouts see how much office space per employee.
Types
Manager offices and meeting rooms with natural light and a modern look, using toughened safety glass.
Full privacy for archives and management rooms, in finishes matched to your furniture.
Timber below and glass above to balance privacy and light.
Low or high panels mounted on desks to reduce distraction and noise.
Fabric- or felt-covered panels that absorb sound in open offices.
Systems that can be taken down and reinstalled for multi-use spaces.
Comparison
The right partition depends on the privacy you need, the light you want to keep and your budget.
| Partition type | Privacy | Best for |
|---|---|---|
| Clear glass | Low visual privacy | Meeting rooms and open areas |
| Glass with privacy film | Medium | Manager offices that keep light |
| Full timber | High | Archives, interview rooms, management |
| Mixed timber and glass | Medium to high | Departments and middle management |
| Workstation screens | Low to medium | Open offices and call centres |
Delivery
An organised process that minimises time on site and keeps the office clean.
01
Measuring the site, floors, ceilings and columns.
02
Locating rooms, walkways and doors.
03
Glass type, frames, timber and colours.
04
Shop drawings and a 3D preview.
05
Design, specification and schedule approved.
06
Frames and panels prepared in the factory.
07
Fast installation, off-peak when needed.
08
Doors, seals and finishes inspected.
Results
Re-divide space later without demolition.
Glass keeps daylight deep inside the office.
Clear rooms for meetings and calls.
Much faster to install than fixed walls.
A general meeting room does not need full visual privacy, while interview and HR rooms do. Choose the partition by use, not just by looks.
Single glazing reduces sound but does not fully isolate it. For higher acoustic privacy we use thicker or double glazing and seal the joints at ceiling and floor.
We use toughened safety glass and manifestation strips at eye level so people do not walk into it, with rigid, durable frames.
Every new room needs lighting, power outlets and air-conditioning, so we coordinate with the finishing contractor before installation.
Privacy films can carry your logo or patterns inspired by your identity, combining function and image.
Demountable systems let you move or enlarge rooms when your organisation changes.
No. Partitions are installed without demolition or building, with power and air-conditioning coordinated where needed.
Toughened safety glass in thicknesses chosen for height and the level of acoustic separation required.
They reduce sound, and isolation can be improved with thicker or double glazing and sealed edges.
Yes. We supply privacy films with patterns or your company logo.
Yes, some systems are demountable and can be reinstalled depending on the partition type.
Yes. We install in Riyadh, Makkah, Madinah, Dammam and other cities.